User`s manual

7-16

SUPERSERVER 7046GT-TRF/7046GT-TRF-TC4 User's Manual

Load Onboard LAN 1 Option ROM/Load Onboard LAN 2 Option ROM

Select Enabled to enable onboard LAN1/LAN2 Option ROMs support which will

allow you to boot your systems using a network interface. The options are Enabled

and Disabled.

Graphic Adapter Boot Priority

This option selects the graphics adapter the system uses as the primary boot device.

The options are Other, Onboard VGA and Slot 6.

XSuper IO Device Conﬁ guration

Serial Port1 Address/Serial Port2 Address

This option speciﬁ es the base I/O port address and the Interrupt Request address

of Serial Port 1 and Serial Port 2. Select Disabled to prevent the serial port from

accessing any system resources. When this option is set to Disabled, the serial port

physically becomes unavailable. Select 3F8/IRQ4 to allow the serial port to use 3F8

as its I/O port address and IRQ 4 for the interrupt address. The options for Serial

Port1 are Disabled, 3F8/IRQ4, 3E8/IRQ4, 2E8/IRQ3. The options for Serial Port2

are Disabled, 2F8/IRQ3, 3E8/IRQ4, and 2E8/IRQ3.

Serial Port 2 Attribute

This feature enables COM2 to act as a virtual COM Port for Serial Over LAN (SOL).

The options are COM and SOL.

XRemote Access Conﬁ guration

Remote Access

This allows the user to enable Remote Access support. The options are Disabled

and Enabled. If Remote Access is set to Enabled, the following items will display:

Serial Port Number

This feature allows the user decide which serial port to be used for Console

Redirection. The options are COM 1 and COM2,

Base Address, IRQ

This item displays the base address and IRQ of the serial port used for

Console Redirection.

Serial Port Mode

This feature allows the user to set the serial port mode for Console Redirection.

The options are 115200 8, n 1; 57600 8, n, 1; 38400 8, n, 1; 19200 8, n, 1; and

9600 8, n, 1.