Datasheet

Chapter 5: Advanced Serverboard Setup
5-27
5-11 Onboard Indicators
LAN LEDs
The Ethernet ports (located beside the
VGA port) have two LEDs. On each
port, the yellow LED fl ashes to indi-
cate activity while the other LED may
be green, amber or off to indicate the
speed of the connection. See the table
on the right for the functions associ-
ated with the connection speed LED.
JLAN1/2 LED
(Connection Speed Indicator)
LED Color Defi nition
Off NC or 10 Mbps
Green 100 Mbps
Amber 1 Gbps
Onboard Power LED (LE1)
An Onboard Power LED is located at
LE1. This LED Indicator is lit when
the system is on. Be sure to unplug
the power cable before removing or
adding any components. See the table
on the right for more details.
IPMI Dedicated LAN LEDs
An additional IPMI Dedicated LAN is
also located on the I/O backplane.
The amber LED on the right indicates
activity, while the green LED on the
left indicates the speed of the connec-
tion. See the table at right for more
information.
Link LED Activity LED
IPMI LAN
IPMI LAN Link LED (Left) &
Activity LED (Right)
LED Status Defi nition
Link (Left) Green: Solid 100 Mbps
Activity (Right) Amber: Blinking Active
BMC Heartbeat LED
A BMC Heartbeat LED is located at
LEM1 on the motherboard. When
blinking, BMC is functioning normally.
BMC Heartbeat LED
LED Defi nition
D1 Blinking: BMC: Normal
Onboard PWR LED Indicator
LED Color Status
Off System Off (PWR cable
not connected)
Green System On
Green:
Flashing
Quickly
ACPI S1 State
Green:
Flashing
Slowly
ACPI S3 (STR) State
Rear UID LED
The rear UID LED is designated LE2.
This LED is used in conjunction with
the rear UID switch to provide easy
identifi cation of a system.
UID LED
Status
Color/State OS Status
Blue: On Windows OS Unit Identifi ed
Blue:
Blinking
Linux OS Unit Identifi ed