Datasheet

Chapter 5: Advanced Serverboard Setup
5-19
Video Connection
A Video (VGA) port is located next to
LAN2 on the I/O backplane. Refer to
the board layout below for the location.
Universal Serial Bus (USB)
Four Universal Serial Bus ports (USB
0/1, USB 2/3) are located on the I/O
back panel. Please note that BP USB
2/3 can also be used for PS2 Keyboard/
Mouse connections. In addition, three
USB headers, located close to the
IO Hub, provides six front-accessible
USB connections (USB 4/5, USB 8/9,
USB 10/11). One Type A connector
(USB6) also supports front panel USB
connection. (Cables are not included).
See the tables on the right for pin
defi nitions.
FP USB (4/5, 8/9, 10/11, USB 6)
Pin Defi nitions
USB 4, 8,10, 6, 7
Pin # Defi nition
USB 5, 9, 11
Pin # Defi nition
1 +5V 1 +5V
2 PO- 2 PO-
3 PO+ 3 PO+
4 Ground 4 Ground
5 NC 5 Key
(NC = No connection)
Backplane
USB (0/1, 2/3)
Pin Defi nitions
Pin# Defi nition
1 +5V
2 PO-
3 PO+
4 Ground
5NA
Ethernet Ports
Two Gigabit Ethernet ports (LAN1,
LAN2) are located on the I/O backplane
on the motherboard. In addition, an
IPMI_Dedicated LAN is located above
USB 0/1 ports on the backplane to
provide KVM support for IPMI 2.0. All
these ports accept RJ45 type cables.
Please refer to the LED Indicator
Section for LAN LED information.
LAN Ports
Pin Defi nition (LAN 1/2)
Pin# Defi nition Pin# Defi nition
1 P2V5SB 10 SGND
2 TD0+ 11 Act LED
3 TD0- 12 P3V3SB
4 TD1+ 13 Link 100 LED
(Yellow, +3V3SB)
5 TD1- 14 Link 1000 LED
(Yellow, +3V3SB)
6 TD2+ 15 Ground
7 TD2- 16 Ground
8 TD3+ 17 Ground
9 TD3- 18 Ground
(NC = No Connection)