Datasheet

Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 8015C-T. Instal-
lation and maintenance should be performed by experienced technicians only.
The SuperServer 8015C-T is a high-end quad processor server based on the
SC818TQ-1000 1U rackmount server chassis and the Super X7QCE serverboard.
The X7QCE supports four Intel® Xeon MP processors - please refer to our web
site for an up-to-date list of supported processors.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the Super X7QCE serverboard
and the SC818TQ-1000 chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 8015C-T into
a rack and check out the server confi guration prior to powering up the system. If your
server was ordered without the processor and memory components, this chapter will
refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 8015C-T.
Chapter 5: Advanced Serverboard Setup
iii
Preface