Datasheet

Chapter 7: BIOS

7-21

Parity Checking

This option allows the user to enable or disable SB IDCHK# and PCI SERR # Parity

Checking. The options are Enabled and Disabled.

Wait for ‘F1’ If Error

Select Enable to allow the system to wait for the user to press F1 when an error

occurs. The options are Enabled and Disabled.

Hit ‘DEL’ Message Display

Select Enabled to display the Setup Message: "Press DEL to run Setup" when the

user hits the DEL key. The options are Enabled and Disabled.

Interrupt 19 Capture

Select Enabled to allow Option ROMs to trap Interrupt 19. The options are Enabled

and Disabled.

Boot Graphic Adapter Priority

This feature allows the user to select which graphics controller to be used as the

primary boot device. The options are Auto and Onboard VGA.

Watch Dog Timer

If enabled, this option will automatically reset the system if the system is not active

for more than 5 minutes. The options are Enabled and Disabled.



Boot Device Priority

This feature allows the user to specify the sequence of priority for the Boot De-

vice.

The settings are 1st Floppy Drive, CD ROM, ATAPI CDROM and Disabled. The

default settings are the following:

· 1st boot device – 1st Floppy Drive

· 2nd boot device – Network: IBA GE Slot

· 3rd boot device – Network: IBA GE Slot



Hard Disk Drive

This feature allows the user to specify the boot sequence from available HDDs.

1st Drive

This option allow the user to specify the boot sequence for the ﬁ rst HDD.

· 1st boot device