User's Manual (1.0b)

Chapter 1: Overview
1-5
X10DRH-C/CT/i/iT Jumpers
Jumper Description Default Setting
JBT1 Clear CMOS/Reset BIOS Conguration See Chapter 2
JI
2
C1/JI
2
C2 SMB to PCI-E Slots Pins 2-3 (Disabled)
JPB1 BMC Enable Pins 1-2 (Enabled)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPL1 GLAN1/GLAN2 Enable (X10DRH-C/i)
(10G) TLAN1/TLAN2 Enable (X10DRH-
CT/iT)
Pins 1-2 (Enabled)
JPME2 Manufacture (ME) Mode Select Pins 1-2 (Normal)
JWD1 Watch Dog Timer Enable Pins 1-2 (Reset)
JPS1 SAS Enable (X10DRH-C/CT only) Pins 1-2 (Enabled)
X10DRH-C/CT/i/iT Connectors
Connectors Description
BT1 (Battery) Onboard CMOS battery (See Chpt. 3 for Used Battery Dis-
posal)
COM1/COM2 Backplane COM Port1/Front accessible COM2 header
FAN1-6,A, B CPU/system fan headers (Fan 1-Fan 6, Fan A, Fan B)
J24 24-pin ATX main power connector (See Warning on Pg. 1-6.)
JD1 Speaker/Power LED header
JF1 Front panel control header
JIPMB1 4-pin external BMC I
2
C header (for an IPMI card)
JL1 Chassis intrusion header
JPI
2
C1 Power supply SMBbus I
2
C header
JPWR1/JPWR2 12V 8-pin power connectors (See Warning on Pg. 1-6.)
JSTBY1 Standby power connector
JTPM1 TPM (Trusted Platform Module)/Port 80 header
LAN1/LAN2 G-bit Ethernet (GLAN) ports 1/2 (X10DRH-C/i)
10G-bit Ethernet (TLAN) ports 1/2 (X10DRH-CT/iT)
IPMI_LAN IPMI_dedicated LAN support by the ASpeed controller
I-SATA 0-5 SATA 3.0 connectors supported by Intel PCH (I-SATA 0-5),
(I-SATA4/I-SATA5: can be used as Supermicro SuperDOM
(Disk-on-Module) with built-in power connectors)
S-SATA SATA 3.0 vertical connector w/4-SATA connections supported
by Intel SCU
SAS(0-3,4-7(JS39)
(for X10DRH-C/CT)
SAS 3.0 connections (0-3,4-7) supported by the LSI 3108
(CPU1) Slot1 PCI-Express 3.0 x8 slot from CPU1
(CPU1) Slot2 PCI-Express 3.0 x8 slot from CPU1