User's Manual (1.0b)

1-6
X10DRH-C/CT/i/iT Motherboard User’s Manual
Warning!
To avoid damaging the power supply or the motherboard, be sure to use a power supply
that contains a 24-pin and two 8-pin power connectors. Be sure to connect the power
supply to the 24-pin power connector (J24) and two 8-pin power connectors (JPWR1,
JPWR2) on the motherboard. Failure to do so may void the manufacturer warranty on
your power supply and motherboard.
(CPU1) Slot3 PCI-Express 3.0 x8 slot from CPU1
(CPU2) Slot4 PCI-Express 3.0 x16 slot from CPU2
(CPU2)Slot5 PCI-Express 3.0 x8 slot from CPU2
(CPU2)Slot6 PCI-Express 3.0 x8 slot from CPU2
(CPU2)Slot7 PCI-Express 3.0 x8 slot from CPU2
(I-)SGPIO1/2 Seria_Link General Purpose I/O headers 1/2 for SATA ports
(I-SGPIO1 for I-SATA0-3, I-SGPIO2 for I-SATA4/5)
SP1 Internal speaker/buzzer
UID UID (Unit Identication) switch
(BP) USB 0/1 (2.0) Backpanel USB 2.0 ports 0/1
(FP) USB 2/3 (2.0) Front accessible USB 2.0 connections (USB 2/3) header
(BP) USB 4/5 (3.0) Backpanel USB 3.0 ports 4/5
(FP) USB 7/8 (3.0) Front accessible USB 3.0 connections (USB 7/8) header
(FP) USB 6 (3.0) Front accessible Type A 3.0 connector (USB6)
VGA Backpanel VGA port
X10DRH-C/CT/i/iT LED Indicators
LED Description State Status
DS13 (X10DRH-C/CT) SAS Heartbeat LED Green: Blinking SAS Normal
LE1 Rear UID LED Blue: On Unit Identied
LE2 Onboard PWR LED On Power On
LEDM1 BMC Heartbeat LED Green: Blinking BMC Normal
LEDS5 (X10DRH-C/CT) SAS Activity LED Green: Blinking SAS Active
LEDS6 (X10DRH-C/CT) SAS Fault LED Red: On
SAS Error(s)
Detected