User's Manual (1.0b)

1-8
X10DRH-C/CT/i/iT Motherboard User’s Manual
• RAID (PCH) RAID 0, 1, 10, 5
• SAS 3.0
(X10DRH-C/
CT Only)
Eight (8) SAS/SATA 3.0 connec-
tions (SAS 0-3, 4-7)
• RAID
(LSI3108)
RAID 0, 1, 5, 6, 10, 50, 60
Hardware RAID + 2GB cache
from the LSI 3108 SAS control-
ler with optional SuperCAP for
battery backup
IPMI 2.0
• IPMI 2.0 supported by ASpeed AST 2400
Serial (COM) Port
• One (1) Fast UART 16550 port on the I/O back panel
• One (1) serial-port header
Peripheral
Devices
USB Devices
• Two (2) USB 2.0 ports on the rear I/O panel (USB 0/1)
• Two (2) USB 3.0 ports on the rear I/O panel (USB 4/5)
• One (1) internal USB 2.0 header for two (2) USB 2.0
connections for front-panel support (USB 2/3)
• One (1) type-A USB 3.0 connector for front access
(USB6)
• One (1) internal USB 3.0 header for two (2) USB 3.0
connections for front panel support (USB 7/8)
BIOS
• 16 MB SPI AMI BIOS
®
SM Flash UEFI BIOS
• ACPI 2.0/3.0/4.0, USB keyboard, Plug-and-Play
(PnP), SPI dual/quad speed support, RTC (Real-
Time Clock) Wake-Up, and SMBIOS 2.3
Power
• ACPI Power Management
Management
• Main switch override mechanism
• Power-on mode for AC power recovery
• Intel® Intelligent Power Node Manager 3.0 (avail-
able when the Supermicro Power Manager [SPM] is
installed and a special power supply is used. See the
note on Page 1-14.)
• Management Engine (ME)