User's Manual (1.0b)
4-38
X10QBi Platform User’s Manual
10, 11, 12; IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12; IO=3E8h; IRQ=3, 4, 5, 6, 7, 10,
11, 12; IO=2E8h; IRQ=IRQ=3, 4, 5, 6, 7, 10, 11, 12.
Device Mode
Use this feature to select the desired mode for a serial port specied. The options
are 24MHz/13 and 24MHz.
Serial Port 2 Conguration
Serial Port
Select Enabled to enable a serial port specied by the user. The options are En-
abled and Disabled.
Device Settings
This item displays the settings of Serial Port 2.
Change Settings
This option species the base I/O port address and the Interrupt Request address
of Serial Port 2 (SOL). Select Disabled to prevent the serial port from accessing
any system resources. When this option is set to Disabled, the serial port becomes
unavailable. The options are Auto, O=2F8h; IRQ=3; IO=3F8h; IRQ=3, 4, 5, 6, 7,
10, 11, 12; IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12; IO=3E8h; IRQ=3, 4, 5, 6, 7, 10,
11, 12; IO=2E8h; IRQ=IRQ=3, 4, 5, 6, 7, 10, 11, 12.
Serial Port 2 Attribute
Use this feature to select the attribute for this serial port. The options are COM/
SOL (Serial On LAN), and COM.
Serial Port Console Redirection
COM 1 Console Redirection
This submenu allows the user to congure the following Console Redirection set-
tings for this port.
Console Redirection
Select Enabled for Console Redirection support. The options are Enabled and
Disabled.
COM2/SOL Console Redirection
This submenu allows the user to congure the following Console Redirection set-
tings for the SOL Port specied by the user.