User's Manual (1.0b)

Appendix B: Software Installation Instructions
B-1
Driver/Tool Installation Display Screen
Note 1. Click the icons showing a hand writing on the paper to view the
readme les for each item. Click on a computer icon to the right of an
item to install this item (from top to bottom), one at a time. After installing
each item, you must reboot the system before proceeding with the next
item on the list. The bottom icon with a CD on it allows you to view the
entire contents of the CD.
Note 2. When making a storage driver diskette by booting into a driver CD,
please set the SATA conguration to "Compatible Mode" and congure the
SATA as an IDE in the BIOS Setup. After making the driver diskette, be
sure to change the SATA settings back to your original settings.
Appendix B
Software Installation Instructions
B-1 Installing Software Programs
After you have installed the operating system, a screen as shown below will ap-
pear. You are ready to install software programs and drivers that have not yet been
installed. To install these programs, click the icons to the right of these items.
Note: To install the Windows OS, please refer to the instructions posted
on our website at http://www.supermicro.com/support/manuals/.