User's Manual (1.0b)

1-12
X10QBi-F Platform User’s Manual
Serial (COM) Port
• One (1) Fast UART 16550 Connection on the AOM-
X10QBi-A I/O module for backpanel support
• One Front Accessible Serial Header located on the
X10QBi system board
Baseboard Controller
• AST2400
Peripheral
Devices
USB Devices
• Three (3) USB Headers with six connections (USB
0/1, USB 2/3, USB 6/7)
• Two (2) Type A internal connector (USB 4/5)
BIOS
• 16 MB AMI BIOS
®
UEFI EEPROM Flash BIOS
• APM 1.2, PCI 2.3, ACPI 1.0/2.0/3.0, USB Keyboard,
Plug & Play (PnP), and SMBIOS 2.5
Power
• One (1) 24-pin ATX Main Power Supply Connector
(JPW1)
• Six (6) 8-pin Power Connectors (JPW2-JPW7),
• One (1) SATA DOM Power Connection (JSD1)
Note: All of these power connections are
required for adequate power supply for the
components and the system.
• ACPI/ACPM Power Management
Cong.
• Main switch override mechanism
• Power-on mode for AC power recovery
• Intel
®
Intelligent Power Node Manager (Available
when the NMView utility is installed in the system)
• Manageability Engine
PC Health
CPU Monitoring
Monitoring
Onboard voltage monitors for CPU Vcore (up to 4 CPU
cores), 3.3VDD, 3.3VSB, 12V, 5V, Memory Voltage, and
Battery Voltage.
• CPU 7-Phase switching voltage regulator
• CPU/System overheat LED and control
• CPU Thermal Trip support
• Thermal Monitor 2 (TM2) support