User's Manual (1.0b)

Chapter 2: Installation

2-11

SW1

LED28

JPB1

JPG1

JPL1

AOM-X10QBi-A

Rev. 1.00

SWUID1

JEDUID1

JCOM1

JLAN3

JLAN2 JLAN1

JVGA1

JVGA2

LAN CTRL

BMC

Installing the AOM-X10QBi-A I/O Module on the Mainboard

Note: After you've installed the CPUs and heatsinks on the baseboard,

be sure to install the AOM-X10QBi-A I/O module card on the SIO slot as

shown on the gure below before you power on the system. Without the

I/O module being installed on the motherboard, your system cannot be

turned on.

AOM-X10QBi-A I/O Module

SIO Slot

2-4 I/O Module and Memory Card Installation

I/O Port Locations and Denitions

A. JVGA1: VGA/Video Connector 1

B. JLAN2: LAN Port2

C. JLAN1: LAN Port1

D. JLAN3: (BMC) IPMI_LAN

E. UID (Unit Identier) Switch & UID LED (Blue: Unit Identied)

F. JVGA2: VGA/Video Connector 2

G. JCOM1: COM Connection 1

1 2 3

Jumpers

1. JPL1: LAN Enable/Disable (Default: Pins 1-2: Enabled)

2. JPB1: BMC Enable/Disable (Default: Pins 1-2: Enabled)

3. JPG1: VGA Enable/Disable (Default: Pins 1-2: Enabled)

X10QBi

Rev:1.02

MAC CODE

BAR CODE

MAC CODE