User's Manual (1.0b)

2-18

X10QBi Platform User's Manual

X10QBi

Rev:1.02

MAC CODE

BAR CODE

MAC CODE

2-7 I/O Module Connectors/Ports

The I/O ports are color coded in conformance with the PC Industry Standards. See

the picture below for the colors and locations of the various I/O ports.

Note: Before you power on the system, be sure to install the AOM-X10QBi-

A I/O module card into the SIO slot as shown in the gure. Without the I/O

module being installed on the baseboard, your system cannot be turned on.

SW1

LED28

JPB1

JPG1

JPL1

AOM-X10QBi-A

Rev. 1.00

SWUID1

JEDUID1

JCOM1

JLAN3

JLAN2 JLAN1

JVGA1

JVGA2

LAN CTRL

BMC

AOM-X10QBi-A I/O Module

SIO Slot

I/O Port Locations and Denitions (See the Connector Section)

A. JVG1: VGA/Video Connector 1

B. JLAN2: LAN Port2

C. JLAN1: LAN Port1

D. JLAN3: (BMC) IPMI_LAN

E. UID (Unit Identier) Switch & UID LED (Blue: Unit Identied)

F. JVG2: VGA/Video Connector 2

G. JCOM1: COM Connection 1

2 3

Jumpers (See the Jumper Section)

1. JPL1: LAN Enable/Disable (Default: Pins 1-2: Enabled)

2. JPB1: BMC Enable/Disable (Default: Pins 1-2: Enabled)

3. JPG1: VGA Enable/Disable (Default: Pins 1-2: Enabled)