User's Manual (1.0b)

Chapter 2: Installation
2-19
X10QBi
Rev:1.02
MAC CODE
BAR CODE
MAC CODE
SW1
LED28
JPB1
JPG1
JPL1
AOM-X10QBi-A
Rev. 1.00
SWUID1
JEDUID1
JCOM1
JLAN3
JLAN2 JLAN1
JVGA1
JVGA2
LAN CTRL
BMC
AOM-X10QBi-A I/O Module
SIO Slot
C
D
A
C
B
Video Connectors (On the I/O
Module)
Two Video (VGA) ports are located
on the AOM-X10QBi-A I/O module.
Refer to the baseboard layout below
for the location.
A. COM1
B. COM2
C. VGA1
D. VGA2
Serial Ports (COM1: On the I/O
Module, COM2: On the Baseboard)
A COM port (COM1) is located on the
AOM-X10QBi-A I/O module. Another
COM port header (COM2) is located on
the X10QBi baseboard to provide front-
accessible serial support. See the table
on the right for pin denitions.
Serial COM) Ports
Pin Denitions
Pin # Denition Pin # Denition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 N/A
X10QBi-A Baseboard