User's Manual (1.0b)

Chapter 2: Installation
2-25
Power Button
Red (OH/Fan Fail/
PWR FaiL)
1
NIC1 Link LED
Reset Button
2
Power Fail LED
HDD LED
FP PWRLED
Reset
PWR
3.3V
3.3V
Blue Led Cathode
(UID)
Ground
Ground
1920
3.3V
X
Ground
NMI
X
NIC2 Link LED
NIC2 Active LED
NIC1 Active LED
X10QBi
Rev:1.02
MAC CODE
BAR CODE
MAC CODE
B
Power Fail LED
The Power Fail LED connection is
located on pins 5 and 6 of JF1. Re-
fer to the table on the right for pin
denitions.
A. Front UID LED (Blue)
B. OH/ Fail/PWR Fail LED (Red)
C. PWR Supply Fail
A
C
PWR Fail LED
Pin Denitions (JF1)
Pin# Denition
5 3.3V
6 PWR Supply Fail
Overheat (OH)/Fan Fail/PWR Fail/
UID LED
Connect an LED cable to the OH/
Fan Fail/FP UID connection on pins
7 and 8 of JF1 to provide advanced
warnings of chassis overheating or
fan failure. It also works as the front
panel UID LED indicator. The red LED
takes precedence over the blue LED
by default. Refer to the table on the
right for pin denitions.
OH/Fan Fail/PWR Fail/UID LED
Pin Denitions (JF1)
Pin# Denition
7 Red+ (Blue LED Cathode)
8 Blue+ (OH/Fan Fail/PWR Fail/
UID LED)
OH/Fan Fail Indicator
Status
State Denition
Off Normal
On Overheat
Flash-
ing
Fan Fail