User's Manual (1.0b)

2-38
X10QBi Platform User's Manual
SW1
LED28
JPB1
JPG1
JPL1
AOM-X10QBi-A
Rev. 1.00
SWUID1
JEDUID1
JCOM1
JLAN3
JLAN2 JLAN1
JVGA1
JVGA2
LAN CTRL
BMC
2-10 Onboard LED Indicators
A. LAN1/2 LEDs
B. IPMI LAN LEDs
IPMI-Dedicated LAN LEDs (On the I/O
Module)
In addition to LAN 1/LAN 2, an IPMI-dedicat-
ed LAN is also located on the I/O module.
The amber LED on the right indicates activ-
ity, while the green LED on the left indicates
the speed of the connection. Refer to the
tables on th right for more information.
Link LED
Activity LED
IPMI LAN (F models only)
IPMI LAN Link LED (Left) &
Activity LED (Right)
Color/State Denition
Link (Left) Green: Solid 100 Mbps
Activity (Right) Amber: Blinking Active
A
B
LAN LEDs (On the I/O Module)
Two LAN ports (LAN 1/LAN 2) are located
on the I/O module of the system. Each Eth-
ernet LAN port has two LEDs. The yellow
LED indicates activity, while the other Link
LED may be green, amber, or off to indicate
the speed of the connections. Refer to the
tables on the right for more information.
LAN 1/LAN 2 Link LED (Right)
LED State
LED Color Denition
Off No Connection or 10 Mbps
Green 100 Mbps
Amber 1 Gbps
LAN 1/LAN 2 Activity LED (Left)
LED State
Color Status Denition
Yellow Flashing Active
Rear View (when facing the
rear side of the chassis)
Activity LED
Link LED
A
B