User's Manual (1.0b)

4-12
X10QBi Platform User’s Manual
IIO Conguration
(For /IIO1 Conguration/IIO2 Conguration/ IIO3 Conguration, please refer to
Page 4-15.)
IIO0 Conguration
PCI-E Completion Timeout
Select Enable for PCI-E Completion Timeout support for electric tuning. The
options are Enable and Disable.
PCI-E Completion Timeout Value
Use this item to set the PCI-E Completion Time-out value for electric tuning.
Enter a value between 260ms to 900ms.
PCI Express Port 0 (DMI)
Note: For PCI Express Port 1A/Port 1B/Port 2A/Port 2B/Port 2C/Port 2D/
Port 3A/Port 3B/Port 3C/Port 3D, see the next section.
Use the items below to congure the PCI-E settings for a PCI-E port specied
by the user.
The following items will display:
•PCI-E Port Link Status
•PCI-E Port Link Max
•PCI-E Port Link Speed
Link Speed
Use this item to select the PCI-E link speed for the PCI-E port specied by the
user. The options are GEN1 (2.5 GT/s), GEN2 (5 GT/s), and Auto.
Override Max Link Width
Use this feature to set the link speed for a selected PCI-E port to override the
maximum link-width which was previously set by PCI-Bifurcation. The options
are Auto, x1, x2, x4, x8, and x16.
PCI-E Port DeEmphasis
Use this item to select the De-Emphasis control setting for a PCI-E port specied
by the user. The options are -6.0 dB and -3.5 dB.