User's Manual (1.0b)
Chapter 4: AMI BIOS
4-13
PCI-E ASPM Support
Select Enable to support the Active State Power Management (ASPM) level for
a PCI-E port specied by the user. Select Disabled to disable ASPM support.
The options are Disable and L1 Only.
Fatal Err (Error) Over
Select Enable to force the fatal error propogation to the II0 core-error-logic for
the port specied by the user. The options are Disable and Enable.
Non-Fatal Err (Error) Over
Select Enable to force non-fatal error propogation to the II0 core-error-logic for
the port specied by the user. The options are Disable and Enable.
Corr (Correctable) Err (Error) Over
Select Enable to force correctable error propogation to the II0 core-error-logic for
the port specied by the user. The options are Disable and Enable.
L0s Support
When this item is set to Disable, II0 will never put its transmitter in the L0s state.
The options are Disable and Enable.
PCI Express Port 1A/Port 1B/Port 2A/Port 2B/Port 2C/
Port 2D/Port 3A/Port 3B/Port 3C/Port 3D
Use the items below to congure the PCI-E settings for a PCI-E port specied
by the user.
The following items will display:
•PCI-E Port Link Status
•PCI-E Port Link Max
•PCI-E Port Link Speed
PCI-E Port
Select Enable to enable the PCI-E port specied by the user. The options are
Auto, Enable, and Disable.
Hot Plug Capable
Select Enable to enable hot-plugging support for the PCI-E port specied by the
user, which will allow the user to replace the device installed on the port without
shutting down the system. The options are Disable and Enable.