User Manual
Table Of Contents
- Preface
- Chapter 1 Introduction
- Chapter 2 Installation
- 2-1 Standardized Warning Statements
- 2-2 Static-Sensitive Devices
- 2-3 Motherboard Installation
- 2-4 Memory Support
- 2-5 Connectors/IO Ports
- 2-6 Connecting Cables
- ATX PWR, DC PWR and HDD PWR Connectors (JPW1, PJ1, J6)
- Fan Headers (FAN1 ~ FAN4) (FAN4 is available on PCB 2.00 only)
- Chassis Intrusion
- System Management Bus Header
- DOM PWR Connector
- TPM Header/Port 80 Header
- Overheat LED Header
- Speaker
- Standby Power
- I-SGPIO1/I-SGPIO2
- NVMe I2C Header
- Power SMBus (I2C) Connector (available on PCB 2.00 only)
- System Management Bus Header
- GPIO Header
- ATX PWR, DC PWR and HDD PWR Connectors (JPW1, PJ1, J6)
- 2-7 Jumper Settings
- 2-8 Onboard Indicators
- 2-9 SATA Connections
- Chapter 3 Troubleshooting
- Chapter 4 BIOS
- Appendix A BIOS Error Beep Codes
- Appendix B Software Installation Instructions
- Appendix C UEFI BIOS Recovery Instructions
- Appendix D Dual Boot Block
Chapter 1: Introduction
1-13
IPMI 2.0
IPMI 2.0 supported by Aspeed AST2400 BMC (Base-
board Management Controller)
VGA (Graphics Display)
One (1) VGA Port on the rear IO panel supported by the
Aspeed AST2400 VGA Controller
BIOS 128 Mb AMI BIOS
®
SPI EEPROM BIOS
Plug and Play, ACPI 5.0, SMBIOS 2.8, BIOS Rescue
Hot-Key, RTC Wakeup, Dual-Boot Block
Power Conguration ACPI/ACPM Power Management (S0, S4 and S5 only)
Wake-On LAN
Power Button Override
Power-on mode for AC power recovery
PC Health Monitoring Onboard Voltage Monitoring
+1.8V, +3.3V, +5V, +/-12V, +3.3V Stby, +5V Stby, VBAT,
HT, Memory, PCH Temp, System Temp, Memory Temp
CPU 1+1-phase switching voltage regulator
CPU/System overheat LED and control
CPU Thermal Trip support
Power Supply Monitoring
Thermal Monitor Support
Fan Control
Low noise fan speed control
Fan status monitoring via IPMI connections
Dual Cooling Zone (PCB 2.00 only)
BMC Health Monitoring
BMC Fan control and thermal alert by sensors monitor-
ing, including CPU, memory and motherboard ambient
temperatures
System Management PECI (Platform Environment Conguration Interface) 3.0
System resource alert via SuperDoctor
®
5
SuperDoctor
®
5, Watch Dog Timer, NMI, Node Manager
Chassis Intrusion header and detection
Other RoHs (Full Compliance, Lead Free)
Operating Temperature 0
0
-60
0
C
Dimensions Miini-ITX form factor (6.7" x 6.7")