User Manual

Chapter 4: AMI BIOS
4-49
Wait for "F1" for Error
This option sets whether the system will wait for the user to press "F1"
when an error is detected during POST. The default is Enabled.
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function.
When this item is set to Enabled, the ROM BIOS of the host adaptors will
"capture" Interrupt 19 at bootup and allow the drives that are attached
to these host adaptors to function as bootable disks. If this item is set
to Disabled, the ROM BIOS of the host adaptors will not capture Inter-
rupt 19, and the drives attached to these adaptors will not function as
bootable devices. The options are Enabled and Disabled.
Retry Boot
Select Enabled to force the system to reboot when system fails to boot.
The options are Disabled and Enabled.
Watch Dog Function
If enabled, the Watch Dog timer will allow the system to reboot when
it is unresponsive for more than 5 minutes. The default is Enabled.
Power Button Function
This feature controls how the system shuts down when the power but-
ton is pressed. Select 4 Seconds Override for the user to power off the
system after pressing and holding the power button for 4 seconds or
longer. Select Instant Off to instantly power off the system as soon as
the user presses the power button. The options are Instant Off, and 4
Seconds Override.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select
Power-Off for the system power to remain off after a power loss. Select
Power-On for the system power to be turned on after a power loss. Select
Last State to allow the system to resume its last power state before a
power loss. The options are Last State, Power On, Stay Off.
CSM Support
This option enables the Compatibility Support Module (CSM) which per-
mits the loading of a traditional OS or the use of a traditional OpROMs.
The options are Enabled and Disabled.