Datasheet

D-12
X6DAL-G/X6DAL-TG User's Manual
The action buttons are:
* Logout—Selecting Logout ends your session and returns you to the Login
screen.
* Rescan—Used to rescan the configuration of the system. Typically, when a
rescan is required, it occurs automatically; for example, after an array is
created.
However, the system configuration can change without Adaptec Storage
Manager being notified. For example, drives that are inserted or removed from
a nonintelligent enclosure, or an enclosure powered on after you logged into
Adaptec Storage Manager would not be displayed unless you manually rescan.
The remaining buttons open additional windows that provide more detailed
information, and allow you to perform actions or change settings on a specific
aspect of your storage subsystem. These are:
* Events
* Options
* Help
* Properties
* Tasks
Immediately following the header frame is a controller information line including
the model number of the first Adaptec RAID controller found in the system, and
the amount of cache memory (if any) installed on that controller.
Beneath the controller information are Physical Devices and Logical Devices
views that show connected devices and existing arrays on this controller.
Controller information and device views are repeated for each additional
Adaptec RAID controller in the system.
Select the controller by clicking anywhere on the controller information. When
the controller is selected, the Events, Properties and Tasks buttons change
from blue to amber, indicating that clicking any of them will display an additional
window with information and options specific to this controller.
Pop-Up Tool Tips
If you position the cursor over a device or button a pop-up tool tip appears. For
buttons, the tips contain helpful information about the function of the button,
while for devices they display additional information.
Physical Devices
The Physical Devices view displays information about the drives and
enclosures attached to the Adaptec RAID controller. The devices are shown
organized by the channel or port that they are connected to and shown in
numerical order.