Datasheet

Appendix D: Installing the Adaptec SATA HostRAID Utility
D-13
The display for each channel includes information on maximum speed
capability, the number of the channel on the controller, and the number of
devices found (excluding the SCSI controller).
Selecting a channel or device will turn the Events, Properties, and Tasks
buttons amber. This indicates that clicking any of these buttons will display an
additional window with information and options specific to that device or
channel.
At the top of the Physical Devices view, grouped to the right of View, are three
view selection buttons. These buttons select the physical devices connected
to this controller.
Changing How Drives are Displayed
By default, the Physical Devices displays a condensed view of the controller
configuration that hides detailed information about the drives. More information
is available by either positioning the mouse pointer over the device or clicking
on the arrowhead to the left of a row of devices.
The selected display mode button will appear in a lighter shade of blue than the
other two buttons. The default display is the Text Description View, but in the
condensed view used when Adaptec Storage Manager is loaded, the display
is the same in all three modes.
If you change the display mode by selecting one of the other view buttons, a
yellow arrow flashes to the left of any devices where the condensed display
prevents omits information.
An icon is always the first entry on each device line. The icon is used
to represent a hard disk drive. If a + symbol appears with the hard disk drive
icon , the drive is a hot spare. Different icons are used to represent
other devices.
View
is the default display mode and when expanded, will show the
following information about each device:
* Capacity of the drive
* Drive manufacturer and model number
* SCSI drive ID, or Serial ATA port number