Datasheet

1-10
Introduction
X6DAL-G/X6DAL-TG User's Manual
1-3 Special Features
BIOS Recovery
The BIOS Recovery function allows you to recover your BIOS image file if
the BIOS flashing procedure fails (see Section 3-3).
Recovery from AC Power Loss
BIOS provides a setting for you to determine how the system will respond
when AC power is lost and then restored to the system. You can choose
for the system to remain powered off (in which case you must hit the
power switch to turn it back on) or for it to automatically return to a power-
on state. See the Power Lost Control setting in the Advanced BIOS Setup
section to change this setting. The default setting is Last State.
1-4 PC Health Monitoring
This section describes the PC health monitoring features of the SUPER
X6DAL-G/X6DAL-TG. All have an onboard System Hardware Monitor chip
that supports PC health monitoring.
Onboard Voltage Monitors for the CPU Cores, Chipset
Voltage, +3.3V, +5V, +12V, -12v, +3.3V Standby, +2.5V (for
DRAM), +1.5V Standby, +1.2V
An onboard voltage monitor will scan these voltages continuously. Once a
voltage becomes unstable, a warning is given or an error message is sent
to the screen (only when SuperDoctorIII is installed). Users can adjust the
voltage thresholds in SuperDoctorIII.
Fan Status Monitor with Firmware/Software On/Off Control
The PC health monitor can check the RPM of the cooling fans. The onboard
4-pin CPU and chassis fans are controlled by the power management func-
tions.