Datasheet

Chapter 4: AMI BIOS

4-9

ATA(PI) 80Pin Cable Detection

This feature allows the AMI BIOS to auto-detect 80Pin ATA(PI) Cable. The

options are: Host & Device, Host and Device.

XFloppy Configuration

This option allows the user to configure the settings for the Floppy Drives

installed in the system.

Floppy A

Move the cursor to these fields via up and down <arrow> keys to select

the floppy type. The options are Disabled, 360 KB 5 1/4", 1.2 MB 5 1/4",

720 KB 3½", 1.44 MB 3½”, and 2.88 MB 3½". Default setting for Floppy

A drive is 1.44 MB 3½”.

OnBoard Floppy Controller

Select "Enabled" to enable the Onboard Floppy Controller. The options are

"Disabled", and "Enabled."