Computer Hardware User Manual

Chapter 4: AMI BIOS

4-9

Advanced Chipset Settings

This item allows the user to conﬁ gure the Advanced Chipset settings for the sys-

tem.

NorthBridge Conﬁ guration

This feature allows the user to conﬁ gure the settings for the Intel E7520 NorthBridge

chipset.

Memory Remap Feature

Select Enabled to allow remapping of the overlapped PCI memory above the total

physical memory. The options are Enabled and Disabled.

Max. Payload of Slot#5/Slot#6

This feature allows the user to set the maximum payload size that PCI-Exp. Slot#5/

Slot#6 can support for Transaction Layer Packets (TLPs). The options are 128B

and 256B.

SouthBridge Conﬁ guration

This feature allows the user to conﬁ gure the settings for the Intel ICH South Bridge

chipset.

Power Button Instant-Off

If set to Enabled, the system will power off immediately as soon as the user hits the

power button. If set to Disabled, the system will power off when the user presses the

power button for 4 seconds or longer. The options are Enabled and Disabled.

Intel PCI-X Hub Conﬁ guration

Slot#1/Slot#2/Slot#3/Slot#4 Bus Frequency

This option allows the user to set the maximum PCI speed to be used in the PCI

slot speciﬁ ed. Select "Auto" to allow the BIOS automatically detect the capability of

the device installed on the bus. The options for Slot 1 are Auto, 33 MHz PCI, 66

MHz PCI, 66 MHz PCI-X, and 100 MHz PCI-X. The options for Slot 2 to Slot 4 are

Auto, 33 MHz PCI, 66 MHz PCI, 100 MHz PCI-X, and 133 MHz PCI-X.

I/O Port Decode

This option allows the user to select the decode range for the I/O connections. The

options are 4K Decode and 1K Decode.

VGA 1G-Bit Decode

Select Enabled to enable the function of decoding VGA for the devices installed

behind the PXH PCI Controller Hub. The options are Enabled and Disabled.