User's and BIOS Manual (1.1a)

2-2

X7DA8+/X7DAE+ User's Manual

When handling the processor package, avoid placing

direct pressure on the label area of the fan.

Notes:

1. Always connect the power cord last and always remove it before adding, removing

or changing any hardware components. Make sure that you install the processor

into the CPU socket before you install the CPU heatsink.

2. Intel's boxed Xeon CPU package contains the CPU fan and heatsink assembly.

If you buy a CPU separately, make sure that you use only Intel-certiﬁ ed multi-di-

rectional heatsink and fan.

3. When purchasing an LGA 771 CPU or when receiving a motherboard with an LGA

771 CPU pre-installed, make sure that the CPU plastic cap is in place and none of

the CPU pins are bent; otherwise, contact the retailer immediately.

4. Refer to the MB Features Section for more details on CPU support.

2-3 Processor and Heatsink Installation

CPU Retention Bracket

(Pre-installed on the Back

of the MB)

Motherboard

CPU Socket

CPU

Heatsink

CPU Package Conﬁ guration