Datasheet

Chapter 1: Introduction
1-5
Jumper Description Default Setting
JBT1 CMOS Clear See Chapter 2
JI
2
C1/JI
2
C2 SMB to PCI Slot#1/Slot#2 Speed Pins 2-3 (Disabled)
JPAC1 Audio Enable Pins 1-2 (Enabled)
JPF PWR Force-On Off (Normal)
JPL1/ JPL2 GLAN1/GLAN2 Enable Pins 1-2 (Enabled)
JWD (J19) Watch Dog Pins 1-2 (Reset)
Connector Description
ATX PWR (JPW1) Primary 24-Pin ATX PWR Connector
CPU PWR/PCI-E PWR +12V 8-pin CPU PWR/+12V 4-pin PCI-Exp. PWR
Alarm Reset Alarm Reset (JP5) Header
Audio (J2) High Defi nition Audio Microphone, Line-In/Line-Out
CD-In (CD2) CD-In
Buzzer (SP1) Internal Speaker
Chassis Intru.(JL1) Chassis Intrusion Header
COM1/COM2 (JCOM1/3) COM1/COM2 Serial Port Connectors
Fans 1-6 System cooling fans, chassis fans, CPU fans
Floppy (J22) Floppy Disk Drive Connector
FP Audio (J14) Front Panel Audio Connector
FP Control (JF1) Front Control Panel Connector
IDE1 (JIDE1) IDE1 Hard Drive
Keyboard/Mouse (JKM1) Keyboard/Mouse Connectors
LAN 1/2 (JLAN1) G-bit LAN Ethernet Ports
Printer (J21) Parallel (Printer) Port
PWR LED/SPKR (JD1) Power LED(pins1-3)/Speaker (pins 4-7)
PWR SMB (JPI
2
C) Power System Management (I
2
C) Header
PWR Supply Fail Detect PWR Supply Failure Detection Connector (JPWF:JP3)
I-SATA0-SATA5 (JS1-JS6)Intel SATA 0-5 Connectors
SGPIO1/2 (T-SGPIO1/2) Serial General Purpose Input/Output Headers
Slot#0 (PCI-U) PCI-U Slot
SMB (J18) System Management Bus Header
USB 0/1/2/3 (JUSB3) Back Panel USB 0/1/2/3
USB 4/5/6/7 (JUSB1/2) Front Panel USB 4/5 (JUSB1)/FPUSB 6/7 (JUSB2)
WOL (JWOL1) Wake-on-LAN Header
WOR (JWOR) Wake-on-Ring Header
LED Indicator Description
D31(*Note 4 on Pg. 1-4) Status LED (See Chapter 2)
LE1 Power LED
LE2/LE3 (*Note 5 on 1-4) CPU1 VRM Overheat(LE2)/CPU2 VRM Overheat (LE3)
LE4/LE5 POST LED Indicators (See Chapter 2)
Quick Reference (X7DAL-E+) (See Chapter 2 for details)