Datasheet

4-4

X7DAL-E+ User's Manual

XIDE Channel 0 Master/Slave, SATA Port0, SATA Port1, SATA Port2

and SATA Port3

These settings allow the user to set the parameters of the slots indicated above.

Press <Enter> to activate the following submenu screen for detailed options of

these items. Set the correct conﬁ gurations accordingly. The items included in the

submenu are:

Type

This option allows the user to select the type of IDE hard drive. The option Auto

will allow the BIOS to automatically conﬁ gure the parameters of the HDD installed

at the connection. Select IDE Removable to install an IDE removable device.

Select User to allow the user to enter the parameters of the HDD installed. Select

CDROM if a CDROM drive is installed. Select Other ATAPI if other type of ATAPI

device is installed. Select None if there is no IDE device installed.