Datasheet

4-22
X7DAL-E+ User's Manual
4-5 Security
Choose Security from the Phoenix BIOS Setup Utility main menu with the arrow
keys. You should see the following display. Security setting options are displayed by
highlighting the setting using the arrow keys and pressing <Enter>. All Security BIOS
settings are described in this section.
Supervisor Password Is:
This feature indicates if a supervisor password has been entered to the system.
Clear means such a password has not been used, and Set means a supervisor
password has been entered.
User Password Is:
This feature indicates if a user password has been entered to the system. Clear
means such a password has not been used, and Set means a user password has
been entered.
Set Supervisor Password
When this item is highlighted, press the <Enter> key. When prompted, enter the
Supervisor's password in the dialogue box to set or to change supervisor's password
to allow access to the BIOS.
Set User Password
When the item is highlighted, hit the <Enter> key. When prompted, enter the user's
password in the dialogue box to set or to change the user's password, which will
allow access to the system at boot-up.