User's and BIOS Manual (1.2)

4-4

X7DB3 User's Manual

IDE Channel 0 Master/Slave, IDE Channel 1 Master/Slave, SATA

Port2 and SATA Port3

These settings allow the user to set the parameters of IDE Channel 0 Master/

Slave, IDE Channel 1 Master/Slave, IDE Channel 2 Master, IDE Channel 3 Master

slots. Hit <Enter> to activate the following sub-menu screen for detailed options

of these items. Set the correct conﬁ gurations accordingly. The items included in

the sub-menu are:

Type

This option allows the user to select the type of IDE hard drive. The option Auto

will allow the BIOS to automatically conﬁ gure the parameters of the HDD installed

at the connection. Select User to allow the user to enter the parameters of the

HDD installed. Select CDROM if a CDROM drive is installed. Select ATAPI if a

removable disk drive is installed.

Multi-Sector Transfers

This item allows the user to specify the number of sectors per block to be

used in multi-sector transfer. The options are Disabled, 4 Sectors, 8 Sectors,

and 16 Sectors.

LBA Mode Control

This item determines whether the Phoenix BIOS will access the IDE Channel 0

Master Device via the LBA mode. The options are Enabled and Disabled.

32 Bit I/O

This option allows the user to enable or disable the function of 32-bit data transfer.

The options are Enabled and Disabled.

Transfer Mode

This option allows the user to set the transfer mode. The options are Standard,

Fast PIO1, Fast PIO2, Fast PIO3, Fast PIO4, FPIO3/DMA1 and FPIO4/DMA2.

Ultra DMA Mode

This option allows the user to select Ultra DMA Mode. The options are Disabled,

Mode 0, Mode 1, Mode 2, Mode 3, Mode 4, and Mode 5.

Parallel ATA

Select Enabled to use Parallel ATA. The options are Disabled, and Enabled.