User's and BIOS Manual (1.2)

4-6

X7DB3 User's Manual

4-4 Advanced Setup

Choose Advanced from the Phoenix BIOS Setup Utility menu with the arrow keys.

You should see the following display. The items with a triangle beside them have sub

menus that can be accessed by highlighting the item and pressing <Enter>.

Boot Features

Access the submenu to make changes to the following settings.

Quick Boot Mode

If enabled, this feature will speed up the POST (Power On Self Test) routine by

skipping certain tests after the computer is turned on. The settings are Enabled

and Disabled. If Disabled, the POST routine will run at normal speed.

QuietBoot Mode

Select Enable to display the graphic logo screen during boot up. The options

are Enable and Disable.

POST Errors

It this item is set to Enabled, the setup utility will pause in order to display the

error message when an error occurs. If this item is set to Disabled, the utility will

attempt to boot even if an error occurs. The options are Enable and Disable.

ACPI Mode

Select Yes to use ACPI (Advanced Conﬁ guration and Power Interface) power

management on your system. The options are Yes and No.