Datasheet

2-2

X7DBi+ User's Manual

Installation of the LGA771 Processor

1. Press the socket clip to release

the load plate, which covers the CPU

socket, from its locking position.

Socket Clip

2. Gently lift the socket clip to open the

load plate.

Load Plate

When handling the processor package, avoid placing

direct pressure on the label area of the fan.

Notes: 1. Always connect the power cord last and always remove it before adding,

removing or changing any hardware components. Make sure that you install the

processor into the CPU socket before you install the CPU heatsink.

2. Intel's boxed Xeon CPU package contains the CPU fan and heatsink assembly.

If you buy a CPU separately, make sure that you use only Intel-certiﬁ ed multi-di-

rectional heatsink and fan.

3. The Intel Xeon LGA 771 heatsink and fan comes with a push-pin design and no

tool is needed for installation.

4. Make sure to install the motherboard into the chassis before you install the CPU

heatsink and fan.)

5. When purchasing an LGA 771 CPU or when receiving a motherboard with an LGA

771 CPU pre-installed, make sure that the CPU plastic cap is in place and none of

the CPU pins are bent; otherwise, contact the retailer immediately.

6. Refer to the MB Features Section for more details on CPU support.

2-2 Processor and Heatsink Installation