User's and BIOS Manual (1.0c)

1-3
Chapter 1: Introduction
PCI Expansion Slots
The X7DBP-i/X7DBP-8 has two Universal PCI slots (two PCI-Express x8 slots and
two PCI-X 133 MHz slots). On the X7DBP-8, the green PCI-X slot supports Zero
Channel RAID cards. The system supports the use of one standard size PCI-X
133 MHz or PCI-Express x8 add-on card and one low profi le PCI-X 133 MHz or
PCI-Express x8 add-on card (with pre-installed riser cards). See Section 5-6 for
details.
Onboard Controllers/Ports
One fl oppy drive controller and one onboard ATA/133 controller are provided to sup-
port up to two IDE hard drives or ATAPI devices. The color-coded I/O ports include
one COM port (an additional COM header is located on the serverboard), a VGA
(monitor) port, two USB 2.0 ports, PS/2 mouse and keyboard ports and two gigabit
Ethernet ports. A UID button is included beside the COM1 port.
ATI Graphics Controller
The X7DBP-i/X7DBP-8 features an integrated ATI video controller based on the
ES1000 graphics chip. The ES1000 was designed specifi cally for servers, featuring
low power consumption, high reliability and superior longevity.
Other Features
Other onboard features that promote system health include onboard voltage moni-
tors, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU
overheat sensors, virus protection and BIOS rescue.
1-3 Server Chassis Features
The following is a general outline of the main features of the SC816A-(R)700/
SC816S-(R)700 server chassis.
System Power: 6015P-T/6015P-8
The SC816A-700 and SC816S-700 (6015P-T/6015P-8) both feature a single 700W
power supply. The system must be shut down and the AC power cord removed
before replacing or performing any service on the power supply unit.