User's and BIOS Manual (1.0c)

1-4
S
UPERSERVER 6015P-T(R)/6015P-8(R) User's Manual
System Power: 6015P-TR/6015P-8R
The SC816A-R700 and SC816S-R700 (6015P-TR/6015P-8R) feature redundant
700W power supplies consisting of two power modules. The system does not need
to be shut down when replacing or removing a single power supply module.
SATA/SCSI Subsystem
The SC816 chassis supports up to four SATA or SCSI drives. The SATA/SCSI
drives are hot-swappable units and are connected to a backplane that provides
power and control.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the SATA/SCSI drives.
Front Control Panel
The SC816A-(R)700/SC816S-(R)700's control panel provides you with system
monitoring and control. LEDs indicate UID, system power, HDD activity, network
activity (2) and overheat/fan failure. A main power button and a UID button are
also included.
I/O Backplane
Ports on the I/O backplane include one COM port, a VGA port, two USB ports, PS/2
mouse and keyboard ports, two gigabit Ethernet ports and a UID button/LED. An
external SCSI port is also included on the SC816S-(R)700.
Cooling System
The SC816A-(R)700/SC816S-(R)700 chassis has an innovative cooling design that
features four sets of 40-mm counter-rotating fans located in the middle section of
the chassis. There is a "Fan Speed Control Mode" setting in BIOS (see Chapter
7) that allows chassis fan speed to be determined by system temperature. The
power supply module(s) also includes a cooling fan.