User's and BIOS Manual (1.0c)

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 6015P-T(R)/

6015P-8(R). Installation and maintainance should be performed by experienced

technicians only.

The SuperServer 6015P-T(R)/6015P-8(R) is a high-end server based on the

SC816A-(R)700/SC816S-(R)700 1U rackmount chassis and the X7DBP-i/X7DBP-8,

a dual processor serverboard that supports Intel

Xeon

5100/5000 series proces-

sors at a Front Side (System) Bus speed of 1333/1066/667 MHz and up to 32 GB

of FBD ECC DDR2-667/533 SDRAM.

Manual Organization

Chapter 1: Introduction

The ﬁ rst chapter provides a checklist of the main components included with the serv-

er system and describes the main features of the X7DBP-i/X7DBP-8 serverboard

and the SC816A-(R)700/SC816S-(R)700 chassis, which comprise the SuperServer

6015P-T(R)/6015P-8(R).

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 6015P-

T(R)/6015P-8(R) into a rack and check out the server conﬁ guration prior to pow-

ering up the system. If your server was ordered without processor and memory

components, this chapter will refer you to the appropriate sections of the manual

for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.