User's and BIOS Manual (1.0c)

5-14
S
UPERSERVER 6015P-T(R)/6015P-8(R) User's Manual
Power Button
The Power Button connection is
located on pins 1 and 2 of JF1. Mo-
mentarily contacting both pins will
power on/off the system. This button
can also be confi gured to function
as a suspend button (see the Power
Button Mode setting in BIOS). To turn
off the power when set to suspend
mode, depress the button for at least
4 seconds. Refer to the table on the
right for pin defi nitions.
Universal Serial Bus
(USB0/1)
Two Universal Serial Bus ports are
located beside the PS/2 keyboard/
mouse ports. USB0 is the bottom
connector and USB1 is the top con-
nector. See the table on the right for
pin defi nitions.
Power Button
Pin Defi nitions (JF1)
Pin# Defi nition
1 PW_ON
2 Ground
Universal Serial Bus
Pin Defi nitions (USB0/1)
USB0
Pin # Defi nition
USB1
Pin # Defi nition
1 +5V 1 +5V
2 PO- 2 PO-
3 PO+ 3 PO+
4 Ground 4 Ground
5 N/A 5 Key
Chassis Intrusion
A Chassis Intrusion header is located
at JL1. Attach the appropriate cable
to inform you of a chassis intrusion.
Chassis Intrusion
Pin Defi nitions (JL1)
Pin# Defi nition
1 Intrusion Input
2 Ground
UID Button and LED
A Unit Identifi er button/LED is located
on pins 3 and 4 of JF1. Attach it
to the hardware reset switch on the
computer case. Refer to the table on
the right for pin defi nitions.
UID Button/LED
Pin Defi nitions (JF1)
Pin# Defi nition
3 UID Button
4 UID LED