User's and BIOS Manual (1.0c)

6-4

UPERSERVER 6015P-T(R)/6015P-8(R) User's Manual

Figure 6-2. Removing the Fan Housing

6-4 Drive Bay Installation/Removal

Accessing the Drive Bays

SATA/SCSI Drives: Because of their hotswap capability, you do not need to access

the inside of the chassis or power down the system to install or replace SATA or

SCSI drives. Proceed to the next step for instructions.

Note: You must use standard 3.5" high, SATA/SCSI drives in the SuperServer

6015P-T(R)/6015P-8(R).

DVD-ROM/Floppy Disk Drives: For installing/removing a DVD-ROM or ﬂ oppy disk

drive, you will need to gain access to the inside of the system by removing the top

cover of the chassis. Proceed to the "DVD-ROM and Floppy Drive Installation"

section later in this chapter for instructions.

Note: Only "slim" DVD-ROM and ﬂ oppy drive will ﬁ t into the 6015P-T(R)/6015P-

8(R).