User's and BIOS Manual (1.0c)

7-4

UPERSERVER 6015P-T(R)/6015P-8(R) User's Manual

IDE Channel 0/1 Master/Slave, SATA Port0, SATA Port1, SATA

Port2 and SATA Port3

These settings allow the user to set the parameters for the IDE Channel 0 Master/

Slave drive, IDE Channel 1 Master/Slave drive and the SATA ports. Hit <Enter>

to activate the following sub-menu screen for detailed options. Set the correct

conﬁ gurations accordingly. The items included in the sub-menu are:

Type

Selects the type of IDE hard drive. The options are Auto, (which allows the BIOS

to automatically determine the hard drive's capacity, number of heads, etc.), a

number from 1-39 to select a predetermined type of hard drive, CDROM and

ATAPI Removable. The option "User" will allow the user to enter the parameters

of the HDD installed at this connection. The option "Auto" will allow the BIOS to

automatically conﬁ gure the parameters of the HDD installed at the connection.

Choose the option 1-39 to select a predetermined HDD type. Select CDROM if a

CDROM drive is installed. Select ATAPI if a removable disk drive is installed.