Datasheet

4-6

X7DBU/X7DGU User's Manual

Parallel ATA

This setting allows the user to enable or disable the function of Parallel ATA. The

options are Enabled and Disabled.

Serial ATA

This setting allows the user to enable or disable the function of Serial ATA. The

options are Disabled and Enabled.

Native Mode Operation

Select the native mode for ATA. The options are: Serial ATA, and Auto.

SATA Controller Mode

Select Compatible to allow the SATA and PATA drives to be automatically-detected

and be placed in the Legacy Mode by the BIOS. Select Enhanced to allow the

SATA and PATA drives to be to be automatically-detected and be placed in the

Native IDE Mode. (*Note: The Enhanced mode is supported by the Windows

2000 OS or a later version.)

When the SATA Controller Mode is set to Enhanced, the following items will

display:

Serial ATA (SATA) RAID Enable

Select Enable to enable Serial ATA RAID Functions. (*For the Windows OS

environment, use the RAID driver if this feature is set to Enabled. When this item

is set to Enabled, the item: "ICH RAID Code Base" will be available for you to select

either Intel or Adaptec Host RAID ﬁ rmware. If this item is set to Disabled, the item-

SATA AHCI Enable will be available.) The options are Enabled and Disabled.

ICH RAID Code Base (*Available when SATA RAID is Enabled.)

Select Intel to enable Intel's SATA RAID ﬁ rmware. Select Adaptec to use Adaptec's

HostRAID ﬁ rmware. The options are Intel and Adaptec.

SATA AHCI (*Available when SATA RAID is Disabled.)

Select Enable to enable the function of Serial ATA Advanced Host Interface. (*Take

caution when using this function. This feature is for advanced programmers only.

The options are Enabled and Disabled.)

System Memory

This display informs you how much system memory is recognized as being present

in the system.

Extended Memory

This display informs you how much extended memory is recognized as being

present in the system.