User's and BIOS Manual (1.1b)

4-8

X7DVA-8/X7DVA-E User's Manual

XBoot Features

Access the submenu to make changes to the following settings.

QuickBoot Mode

If enabled, this feature will speed up the POST (Power On Self Test) routine by

skipping certain tests after the computer is turned on. The settings are Enabled

and Disabled. If Disabled, the POST routine will run at normal speed.

QuietBoot Mode

This setting allows you to Enable or Disable the graphic logo screen during

boot-up.

POST Errors

Set to Enabled to display POST Error Messages if an error occurs during bootup.

If set to Disabled, the system will continue to boot without displaying any error

message even when a boot error occurs.

ACPI Mode

Use the setting to determine if you want to employ ACPI (Advanced Conﬁ guration

and Power Interface) power management on your system. The options are Yes

and No.

Power Button Behavior

If set to Instant-Off, the system will power off immediately as soon as the user

hits the power button. If set to 4-sec. Override, the system will power off when

the user presses the power button for 4 seconds or longer. The options are

instant-off and 4-sec override.

Resume On Modem Ring

Select On to “wake your system up” when an incoming call is received by your

modem. The options are On and Off.

Power Loss Control

This setting allows you to choose how the system will react when power returns

after an unexpected loss of power. The options are Stay Off, Power On, and

Last State.

Watch Dog

If enabled, this option will automatically reset the system if the system is not

active for more than 5 minutes. The options are Enabled and Disabled.

Summary Screen

This setting allows you to Enable or Disable the summary screen which displays

the system conﬁ guration during bootup.