User's and BIOS Manual (1.1)

Chapter 2: Installation
2-39
SP1
+
+
B1
JBT1
IPMB
JD1
JPW1
JPW2
JPI2C
JWOL
JWF1
JF1
FAN2
FAN1
FAN5
FAN3
FAN4
T-SGPIO1 T-SGPIO2
JI2C1
JI2C2
JWOR
JL1
3
JPUSB1
JLED
JPL1
JPL2
JPG1
LE1
C
C
LE7
J*
W83627DHG
IDT
89HI0524G2PS
PCH
Hermon
SLOT7 PCI-E 2.0 (2.5GT/s) X1
SLOT6 PCI-E 2.0
SLOT5 PCI-E 2.0 X8
SLOT4 PCI-E 2.0 X8
SLOT3 PCI-E 2.0 (2.5GT/s) X1
USB8/9
FAN2/CPUFAN
USB4
USB5
FAIL PWR
DOM PWR
JWOL:
I-SATA4
I-SATA3
UID
DIMM2A
DIMM2BDIMM2CDIMM1B DIMM1A
Chassis Intrusion
Wake on Lan
Wake on Ring
CMOS CLEAR
1-2:ENABLE
2-3:DISABLE
JPL2:LAN2
JPL1:LAN1
2-3:DISABLE
1-2:ENABLE
JPB:BMC
JPI2C:PWR I2C
JSPK:Buzzer/Speaker
COM2
FLOPPY
DDR3 1066/1333 UDIMM/RDIMM required
JL1:
LAN1/LAN2
JPUSB1:B/P USB WAKE UP
1-2:ENABLE
2-3:DISABLE
JI2C1/JI2C2
USB6/7
2-3:Disable 1-2:Enable
CPU
JLED:Power LED
OFF:Disable
ON:Enable
2-3:DISABLE
1-2:ENABLE
JF1
ON
LED LED
PWRHDD
NIC1
NIC2
OH/FF
RST
PWR
I-SATA2
I-SATA1
I-SATA0
I-SATA5
SLOT2 PCI-E 2.0 (2.5GT/s) X4 (IN X8 SLOT)
SLOT1 PCI 33MHz
DIMM1C
JPG1: VGA
KB/MOUSE
VGA
COM1
IPMI_LAN
USB0/1 USB2/3
X8SIA
Onboard PWR LED Indicator
LED Settings
LED Color Denition
Off System Off
On System on, or
System off and PWR
Cable Connected
Onboard Power LED
An Onboard Power LED is located at LE1
on the motherboard. When LE1 is on, the
AC power cable is connected. Make sure to
disconnect the power cable before removing
or installing any component. See the layout
below for the LED location.
A. Onboard PWR LED
B. IPMI Heartbeat LED
IPMI Heartbeat LED (X8SIA-F Only)
An IPMI Heartbeat LED is located at
LE7. When LE7 blinks, the IPMI functions
properly. Refer to the table on the right for
details. Also see the layout below for the
LED location.
IPMI Heartbeat LED Indicator (LE7)
LED Settings
Green: Blinking IPMI is ready for use
A
B