User`s manual
4-18
X8SIL/X8SIL-F/X8SIL-V
Trusted Computing
TCG/TPM Support
Select Yes to enable support for trusted platforms (TPM 1.1/1.2) and allow the BIOS
to automatically download the drivers needed to provide support for the platforms
specied. The options are Yes and No.
TPM Owner
This feature enables or disables the installation of, or Clears TPM ownership.
The options are Don't Change, Enable Install, Disable Install and Clear.
Execute TPM Command
This feature enables or disables the sending of commands to the TPM. The
options are Don't Change, Enabled and Disabled.
Clearing the TPM
Press <Enter> to clear the TPM memory. This will erase all information related
to TPM support.
If TCG/TPM Support is set to Yes, the TPM Status will display:
TPM Enable/Disable Status
TPM Owner Status
IPMIConguration(X8SIL-FOnly)
Intelligent Platform Management Interface (IPMI) is a set of common interfaces that
IT administrators can use to monitor system health and to manage the system as a
whole. For more information on the IPMI specications, please visit Intel's website
at www.intel.com.
IPMI Firmware Revision
This item displays the current IPMI rmware revision.
Status of BMC
Baseboard Management Controller (BMC) manages the interface between system
management software and platform hardware. This is an informational feature which
returns the status code of the BMC micro controller.
View BMC System Event Log
This feature is used to view any BMC events. It shows the total number of entries
and will allow the viewing of each event by scrolling down on an Entry Number
and pressing Enter.