User`s manual

1-6
X9DRH-7F/-iF/-7TF/-iTF Motherboard User’s Manual
Warning!
To prevent damage to the power supply or motherboard, please use a power supply
that contains a 24-pin and two 8-pin power connectors. Be sure to connect these
power connectors to the 24-pin power connector (J22) and the 8-pin power connectors
(JPWR1/JPWR2) on the motherboard. Failure in doing so will void the manufacturer
warranty on your power supply and motherboard.
(I-)SATA 2~5 Intel SATA 2.0 Connectors (from AHCI): SATA2/3 (T-
SGPIO1) & SATA4/5 (T-SGPIO2) (Available for RAID 0, 1,
5, 10)
(S-)SATA 0~3 SATA 2.0 Connectors 0~3 from SCU (Storage Control Unit)
(Available for RAID 0, 1, 5, 10 when used in conjunction
with T-SPGIO-S)
SAS 0~3, 4~7 Serial_Attached_SCSI Connectors 0~3, 4~7 (X9DRH-7F/-
7TF)
SP1 Onboard Buzzer (Internal Speaker)
T-SGPIO1 Serial Link General_Purpose IO Headers (used in conjunc-
tion with I-SATA 0~3)
T-SGPIO2 Serial Link General_Purpose IO Header (used in conjunc-
tion with I-SATA 4/5)
T-SGPIO-S Serial Link General_Purpose IO Header (used in conjunc-
tion with S-SATA 0~3)
USB 0/1, 2/3 Back Panel USB 0/1, 2/3
USB4/5, 8/9 Front Panel Accessible USB 4/5, 8/9 Connections
USB 6 Front Panel Type A USB 6 Port
VGA Backpanel VGA Port (JVGA)
X9DRH-7F/-iF/-7TF/-iTF LED Indicators
LED Description State Status
DM1 BMC Heartbeat LED Green: Blinking Normal
LE1 Power LED Green: On On
LEDS1 SAS Activity LED Green: Blinking SAS Active
LEDS2 SAS Fault LED Red: On SAS Failed