User's Manual (1.0c)

Chapter 4: AMI BIOS
4-17
COM1Conguration
Serial Port
Select Enabled to enable a serial port specied. The options are Enabled and
Disabled.
Device Settings
This feature displays the serial port settings as specied.
Change Settings
Use this feature to set the settings of a serial port specied. The options are
Auto, IO=3F8h; IRQ=4, IO=3F8h; IRQ=3, IO=2F8h; IRQ=3, IO=3E8h; IRQ=5,
IO=2E8h; IRQ=7, IO=3F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12, IO=2F8h; IRQ=3, 4, 5,
6, 7, 10, 11, 12, IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12, and IO=2E8h; IRQ=3,
4, 5, 6, 7, 10, 11, 12.
Device Mode
Use this feature to select the desired mode for a serial port specied. The options
are Normal and High Speed.
Serial Port Attribute
Use this feature to select the attribute for a serial port specied. The options are
SOL (Serial On LAN), and COM.
Serial Port Console Redirection
COM 1
This submenu allows the user to congure the following Console Redirection
settings for a COM Port specied by the user.
Console Redirection
Select Enabled to use a COM Port selected by the user for Console Redirection.
The options are Enabled and Disabled.
Console Redirection Settings
This feature allows the user to specify how the host computer will exchange
data with the client computer, which is the remote computer used by the user.
Serial Port for Out-of-Band Management/Windows Emergency
Management Services (EMS)
The submenu allows the user to congure the following Console Redirection
settings to support Out-of-Band Serial Port management.