User's Manual (1.0c)

Chapter 2: Installation

2-5

3. Once it is aligned, carefully lower the CPU straight down into the socket. (Do

not drop the CPU on the socket. Do not move the CPU horizontally or verti-

cally.

4. Do not rub the CPU against the surface or against any pins of the socket to

avoid damaging the CPU or the socket.)

5. With the CPU inside the socket, inspect the four corners of the CPU to make

sure that the CPU is properly installed.

6. To close and lock the socket, close the load plate with the CPU. Lock the

'Close 1st' lever rst, then lock the 'Open 1st' lever second. Use your thumb

to gently push the load levers down to the lever locks.

OPEN 1st

Lever Lock

Push down and lock

'Open 1st' lever

Push down and lock

'Close 1st' lever

Gently close

the load plate