9” LED TV COMPATIBLE WITH DVD PLAYER MODEL NO.: SC-1912 USER MANUAL Please read this manual carefully before using, and keep it for future reference.
IMPORTANT INSTRUCTIONS Safety information CAUTION: DVD/VIDEO CD/CD PLAYER IS A CLASS 1 LASER PRODUCT. HOWEVER THIS DVD/VIDEO CD/CD PLAYER USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DVD/VIDEO CD/CD PLAYER CORRECTLY AS INSTRUCTED. WHEN THIS DVD/VIDEO CD/CD PLAYER IS PLUGGED TO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS PLAYER.
Read all instructions before using Do not use this product near water. Install the product in accordance with the operating instructions. Do not set the product near heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit the product.
DISC Handling and Maintenance Handling precautions Hold the disc by the edges so the surface will not be soiled with fingerprints. Fingerprints, dirt and scratches can cause skipping and distortion. Do not write on the label side with a ball-point pen or other writing utensils. Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids. Be careful not to drop or bend the disc. Do not install more than 1 disc on the disc compartment.
TABLE OF CONTENTS GETTING STARTED IMPORTANT INSTRUCTIONS...........................................................................................1-3 ACCESSORIES.....................................................................................................................3 FEATURES............................................................................................................................5 GENERAL PARTS....................................................................................
FEATURES 19" LED DISPLAY This player has a built-in 19” LED display window to provide clear vision and low radiation.
GENERAL PARTS MAIN UNIT Front View Side View Back View 1. LED display screen 2. Remote control sensor / Power indicator - In standby mode the indicator light is red; when switching on the unit the indicator light is blue color. 3. Stand holder 4. VOL +/- button- To increase/decrease the volume level or move left/right. 5. CH +/- button- To select next/previous channel or move up/down. 6. MENU button- To enter menu setting page. 7. SOURCE button- To select the input source.
GENERAL PARTS Back View 1. Power input terminal 2. USB 1 input terminal- For MUSIC/PHOTO playback (TV). 3. HDMI input terminal 4. VGA input terminal 5. PC AUDIO input terminal 6. Y / Pb / Pr input terminals 7. RF input terminal- To connect the external antenna. 8. EARPHONE output terminal 9. CVBS and AUDIO L/R input terminals 10. COAXIAL output terminal 11.
REMOTE CONTROL 1. POWER: To set the unit in standby mode; press it again to switch it on. 2. MUTE: To mute the sound. 3. RED button / : To open or close the disc compartment in DVD mode. GREEN button / GOTO: To play from a certain point in DVD mode. YELLOW button / ANGLE: To display the angle and change angle in DVD mode. BLUE button / A-B: To repeat playing between two specific points (A-B). 4. NUMBER BUTTONS (0-9): To input the number information, such as channel number and so on. 5.
REMOTE CONTROL 19. CH+/-: Press CH+ button to play next channel, or press CH- button to play previous channel. 20. SOUND / MEDIA: To switch the sound mode in TV mode; to switch the unit among DISC/CARD/USB in DVD mode. 21. CC / REPEAT: To set CC function On or Off in TV mode; to repeat playing chapter or title (for DVD) or track for (VCD/CD) 22. MTS/AUDIO / LANGUAGE: To select desired soundtrack in TV mode; to select desired soundtrack language for DVD mode. 23. C.LIST / D.
REMOTE CONTROL PREPARATION BATTERY INSTALLATION Install the batteries as the following pictures. Be sure + and – terminals are positioned as indicated in the battery compartment (Fig1). SERVICE LIFE OF BATTERIES - The batteries normally last for one year although this depends on how often the remote control is used. - If the remote control fails to work even when it is operated near the player, replace the batteries. - Use two size AAA dry batteries.
BASIC CONNECTION ● Ensure all the cables are disconnected from the main unit before connecting to AC power source by AC adaptor. ● Read through the instructions before connecting other equipments. CONNECTING TO AC POWER SOURCE To power outlet AC adaptor CONNECT EXTERNAL ANTENNA TO UNIT Install external antenna into antenna jack for best picture.
COMPOSITE AV CONNECTION For basic connection, use the composite Audio L/R (white/red) and CVBS cable to connect the unit with other devices.
HDMI CONNECTION Use HDMI cable to connect the unit with other devices to receive high-definition multimedia signal. HDMI cable (Optional) Back of DVD/VCR PC/VGA CONNECTION Audio cable (Optional) VGA cable (Optional) Use VGA cable and Audio cable to connect the unit with TV or PC, and use this product as a monitor.
COAXIAL OUT CONNECTION Use coaxial cable to connect the unit with amplifier or other audio decoding devices for coaxial audio signal output.
CONNECTING TO USB MEMORY DEVICE (TV) USB Memory Device (Optional) USB 2 AND CARD CONNECTION (DVD) Insert a USB or SD/MMC/MS memory device for multimedia files playback.
MAKE SURE ALL THE EQUIPMENTS AND AC ADAPTOR ARE CONNECTED PROPERLY AND THE UNIT IS SET IN CORRECT MODE BEFORE KINDS OF OPERATIONS. BASIC OPERATIONS - Press POWER button on the unit or remote control to power ON the unit (indicator will glow blue); press it again to power OFF (standby mode) the unit (indicator will glow red). Compatible with DVD - Press SOURCE button on the unit or remote control to set the unit in DVD mode. 1. Basic play a) Make sure the disc compartment has no disc.
4. Fast forward/Fast backward During playback, press button or button to fast forward/backward. (PLAY) button to resume normal play. Press 5. Pause/play During playback, press button to pause playing, press it again to resume normal playback. 6. MUSIC playback a) Insert the disc containing the files in MUSIC format to be played and after a few seconds, the screen of the monitor will show all the folders on the disc.
c) The files in this folder are displayed and select the desired file by navigation buttons, then press the (PLAY) or ENTER button to start playback. or button, d) During normal playing, press the player will play the next or previous file. e) Press CC (REPEAT) button to change play mode. - SHUFFLE: all the files will be randomly sorted and played by the order. - RANDOM: randomly select any file to play. - SINGLE: play one file only. - REPEAT ONE: repeat one file.
Skip to next/previous picture Press button to skip to the next picture or button to skip to the previous picture. If no key is pressed for 3 seconds, it will skip to next picture automatically. Rotating pictures - Press RIGHT navigation button to rotate the picture clockwise. - Press LEFT navigation button to rotate the picture counter-clockwise. Flipping pictures Press UP navigation button to flip the picture vertically. Press DOWN navigation button to flip the picture horizontally.
9. Compatible with Video CD with playback control a) When playing VCD 2.0 with PBC, the player will show the VCD version. b) Press D.MENU button on remote control repeatedly to set PBC ON or OFF. c) Press numeric buttons to select corresponding track. Example: Track 9, press 0 and 9, several seconds later, it will automatically switch to track 9. Track 15, press -/-- and 5, several seconds later, it will automatically switch to track 15.
11. Compatible with CARD playback a) Insert the CARD (SD/MMC/MS) containing the files in music, picture or movie format to be played. b) Press SOUND (MEDIA) button to switch the unit in CARD reader mode. c) After several seconds, all the folders in the CARD will display on monitor screen. d) Select a folder you want to play by using the navigation buttons and press the ENTER button to confirm.
A-B repeat play Repeating sections between two specific points (A-B repeat) a) Press BLUE (A-B) button during playing at the point where repeat play is to be started (A). b) Press BLUE (A-B) button at the point where repeat play is to be ended (B). Repeat play of the selection between points A and B starts. c) Press BLUE (A-B) button again to return to normal play. 14. GOTO Press GREEN (GOTO) button continuously to select the item you want to set and enter a time number, chapter number, track number, etc.
Press MTS/AUDIO (LANGUAGE) button while playing DVD disc the screen will display the number of current soundtrack languages, pressing the button again will change the language. Pressing MTS/AUDIO (LANGUAGE) button while playing VCD/CD disc will change audio output mode: LEFT MONO, RIGHT MONO, MIX-MONO and STEREO soundtrack. NOTE: When no soundtrack languages are recorded, pressing this button will not work.
1.2 ANGLE MARK - It is used to select whether or not the multi- angle icon is display on screen when a Multi-angle disc is playing. Options: On, Off. 1.3 OSD LANG - It is used to choose the desired language for different user. For this player, you can choose English or other languages. 1.4 CAPTIONS - It is used to switch the caption ON/OFF when playing disc. 1.5 SCREEN SAVER - When the player is not in use for 5 minutes, screen saver will display on the screen. Options: On, Off. 1.
TV - Press SOURCE button on the unit or remote control to set the unit in TV mode. SELECT DESIRED PROGRAM 1. Press CH+ button to play next channel. 2. Press CH- button to play previous channel. 3. Press number buttons on the remote control directly to select desired program. Example : Track 9, press ＂9＂, three seconds later it will turn to track 9 automatically, or press OK button to confirm directly.
CLOSED CAPTION - Press CC button on remote control repeatedly to set the CLOSED CAPTION function On or Off. SLEEP TIMER SETTING - Press SLEEP button on remote control repeatedly to select desired sleep time. Available options: Off, 5 min, 10 min, 15 min, 30 min, 45 min, 60 min, 90 min, 120 min, 180 min, 240 min. VIDEO SIZE SETTING - Press ASPECT button on remote control repeatedly to select desired video size Available options: Normal, Wide, Zoom, Cinema.
FREEZE FUNCTION - During normal playing, press FREEZE button on remote control to hold the picture, and press it again to resume normal playing. USB1 OPERATION (for TV mode only) - Before following operations, insert a USB memory device first, which contains Photo and Music files. - Press SOURCE button on the unit or remote control to set the unit in USB mode. - Press LEFT/RIGHT navigation button to select Photo/Music in the main menu. - Press UP/DOWN navigation button to select preferred file.
During normal playing: - Press UP/DOWN navigation button to play previous/next photo. - Press LEFT/RIGHT navigation button to rotate a photo counterclockwise/clockwise. - Press EXIT button to return to file selecting page. Music Playback - Select Music item in the main menu. - Press UP/DOWN navigation button to select preferred folder/file and press OK button to enter a folder or play selected file. During normal playing: - Press INFO button to display/hide the tool bar.
MAIN MENU ● The unit contains different setting menus. Once the initial programming is entered, it will be remained in the memory until change, and the unit can always be operated under the same conditions. ● The settings will be remained in the memory until the settings are changed, even after setting the player to standby mode. Common procedure for initial settings ● ● ● ● ● ● ● ● Press MENU button on the unit or remote control to display the main menu.
1. PICTURE 1.1 Picture Mode Available options: User, Standard, Dynamic, Mild. 1.2 Contrast The value of Contrast can be adjusted from 0-100. 1.3 Brightness The value of Brightness can be adjusted from 0-100. 1.4 Color The value of Color can be adjusted from 0-100. 1.5 Tint The value of Tint can be adjusted from -50 to 50. NOTE: Tint is adjustable only in certain TV system. 1.6 Sharpness The value of Sharpness can be adjusted from 0-100.
2. AUDIO 2.1 Sound Mode Available options: User, Music, Movie, Standard. 2.2 Bass The value of Bass can be adjusted from 0-100. 2.3 Treble The value of Treble can be adjusted from 0-100. 2.4 Balance The value of Balance can be adjusted from -50 to 50. NOTE: If the value of Bass, Treble, or Balance has been changed, the sound mode will turn to User automatically. 2.5 Surround This item is used to turn on/off Sound Surround function. 2.6 AVC (Auto Volume Control) Available options: On, Off. 2.
3. TIME 3.1 Sleep Timer Available options: Off, 5 min, 10 min, 15 min, 30 min, 45 min, 60 min, 90 min, 120 min, 180 min, 240 min. 3.2 Time Zone Available options: Eastern, Central, Mountain, Pacific, Alaska, Hawaii, Atlantic. 3.3 Daylight Saving Time Available options: On, Off. NOTE: This item is adjustable only for digital programs. 3.4 Clock When an available digital program is present, this unit will get Date and Time information automatically from current program. And it’s not user adjustable. 4.
4.1 Menu Language This item is used to select preferred OSD menu language. 4.2 Transparency This item is used to turn on/off Transparent OSD menu. 4.3 Zoom Mode This item is used to select preferred zoom mode of display screen. Available options: Normal, Wide, Zoom, Cinema. NOTE: The available zoom mode may be different for different input source. 4.4 Noise Reduction Available options: Off, Weak, Middle, Strong. 4.5 Advanced This item is adjustable only for PC/VGA input signal. 4.6 Closed Caption 4.
FG Color Available options: Default, White, Red, Green, Blue, Yellow, Magenta, Cyan. BG Color Available options: Default, Black, Red, Green, Blue, Yellow, Magenta, Cyan. FG Opacity Available options: Default, Solid, Flashing, Translucent, Transparent. BG Opacity Available options: Default, Solid, Flashing, Translucent, Transparent. 4.7 DLC This item is used to turn on/off Dynamic Luminance Control. 4.8 OverScan (HDMI mode only) This item is used to turn on/off OverScan. 4.
5.22 Start to Scan - Press RIGHT or OK button to start auto scanning. - Press MENU or EXIT button to exit auto channel searching. 5.3 Favorite - Press RIGHT or OK button to enter it. - Press UP or DOWN navigation button to select preferred channel. - Press OK button to label the selected channel as a favorite one or not. 5.4 Show/Hide - Press RIGHT or OK button to enter it. - Press UP or DOWN navigation button to select preferred channel. - Press OK button to show or hide the selected channel. 5.
AV AND OTHER MODES - Press SOURCE button on the unit or remote control to select desired input source. - For PICTURE, AUDIO, TIME and SETUP menus, please refer to the menu operations of TV mode. PC/VGA MODE - Press SOURCE button on the unit or remote control to set the unit in VGA mode. - Press MENU button to display the main menu and select Setup item. Then press DOWN navigation button to enter Setup menu page.
MAINTENANCE ● Be sure to press POWER button to set the player to the standby mode and disconnect the AC adaptor before maintaining the player. ● Wipe the player with a dry, soft cloth. ● If the surface is extremely dirty, wipe clean with a cloth which has been dipped in a weak soap-water solution and wrung out thoroughly, and then wipe again with a dry cloth. ● Never use alcohol, benzene, thinner, cleaning fluid or other chemicals. And do not use compressed air to remove dust.
STAND INSTALLATION Your TV is packaged with the Stand and the Cabinet separated. Before enjoying this TV, please carry out the Stand Installation according to the instructions below. Step 1 Place the TV faced down on a soft cloth or cushion to prevent the panel from being damaged. Step 2 Align the stand and the bottom of this TV. Step 3 Tighten the included screws with a screw driver. NOTES: - Unplug the power plug first when installing or removing the TV Stand.
SPECIFICATIONS Display Device 19 inch LED TV Resolution 1366×768 Display Colors 16.7M Contrast Ratio 600:1 Aspect Ratio 16:9 Life Time 30,000 Hrs Supported Discs Signal Format Supported POWER SOURCE POWER CONSUMPTION OPERATION TEMPERATURE DVD/CD/CDR/CDRW/DVD-R/DVD+R/ DVD-RW/DVD+RW/VCD/SVCD Compatible Up to 1366×768@60Hz PC-RGB HDMI Max. 1080P YPbPr Max. 1080P AC adaptor(normal DC 12 V 2.5A) <30W -5℃ to 45℃ MEASUREMENT 437(W)×165 (D)×294(H) mm WEIGHT Approx. 2.
GENERAL TROUBLESHOOTING Check the following points before assuming malfunctions of this unit: Symptom[COMMON] No power. No picture. ● No sound. ● Distorted sound. No operations can be performed with the remote control unit. No key operation (by the main unit and/or the remote control unit) is effective. Symptom[TV] No or poor picture. No sound or poor sound. Noise or other interface. Symptom [DVD compatible] Play does not start even when title is selected.
GENERAL TROUBLESHOOTING Alternative audio soundtrack (or subtitle) languages fail to be selected. Angle cannot be changed. ● An alternative language is not selected with discs which do not contain more than one language. ● In the case of some discs, the alternative language can not be selected by operating the LANGUAGE or SUBTITLE button. Try selecting it from the DVD menu if one is available. This function is dependent on software availability.
Warranty Basic Warranty Statement Supersonic Inc.("Supersonic") warrants this product to the original purchaser ONLY, to be free from defects in materials and workmanship under normal use, for ninety (90) DAYS from the date of original purchase. Proof of purchase (receipt) required. Please visit http://www.supersonicinc.com/warranty for additional information.
