Owners manual

083116
Diagram D
8) Repeat step seven on opposite side.
9) Carefully lower vehicle to the hard surface. Remove the blocks in front and back of the rear wheels.
10) Release emergency brake.
11) Fill out warranty card and send to SuperSprings.
*Contact factory if installation brackets create conflict with coach plumbing/electrical hardware.
Important Notice.
1) For easy installation please read instructions completely first and have all necessary tools available.
2) We recommend that this installation be done by a professional or persons with sound mechanical
knowledge.
3) SumoSprings are designed to work with the original factory springs only. If they have been replaced with
aftermarket springs then please consult with Supersprings International at 866-898-0720.
4) These instructions are meant as a guide for the installation of SumoSprings. SuperSprings International
assumes no liability for the actual installation process. Installers should apply common automotive
safety practices when raising, lowering and working on vehicles.
5) SumoSprings are designed to enhance the vehicles load carrying performance and road handling
however it does not authorize (or recommend) loading beyond the manufacturer’s GVWR specifications.
6) For technical support contact SuperSprings International at 866-898-0720.
To prevent damage to the vehicle and to ensure safety, do not exceed the maximum load recommended
by the vehicles manufacturer (GVWR).