Specification

Thomas and Betts Corporation
Product Guide Specification
METAL FRAMING SYSTEM - SUPERSTRUT®
26 05 29.12-2
REVISION 0
1.04 QUALITY ASSURANCE
A. Manufacturer Qualifications: Products shall be free of defects in material and workmanship.
1.05 WARRANTY
A. Product is warranted free of defects in material and workmanship.
B. Product is warranted to perform the intended function within design limits.
PART 2 – PRODUCTS
2.01 GENERAL
A. Superstrut® modular metal framing system shall be in compliance with the following specifications:
1. Federal Specification W-C-582
2. Federal Specification WW-H-171
3. MFMA-4
4. ASTM B633
2.02 MANUFACTURERS
A. Acceptable Manufacturers:
Thomas & Betts Corporation
8155 T&B Blvd
Memphis, TN 38125
800-816-7809, 901-252-5000
www.tnb.com
Product: Superstrut® Metal Framing System
2.03 DESIGN AND PERFORMANCE REQUIREMENTS
A. Superstrut® metal framing system shall have standard channel width of 1-5/8” and come in five
different available heights: 13/16” (B series), 1-3/8” (C series), 1-5/8” (A series), 2-7/16” (E series)
and 3-1/4” (H series).
B. Superstrut® metal framing channel shall be available in thicknesses of 12 or 14 gauge steel.
C. Superstrut® metal framing channel shall be available in the following different finishes: GoldGalv®,
Pregalvanized, Hot-dipped galvanized, SilverGalv®, and PVC coated.
D. Superstrut® metal framing channel shall also be available in stainless steel or aluminum.
E. Superstrut® metal framing system shall have the following accessory offering:
1. threaded products and hardware
2. fittings and brackets
3. concrete inserts
4. beam clamps
5. pipe straps, conduit clamps and hangers
2.04 MATERIALS
A. Steel channel sections shall be rolled from AISI C1008 commercial grade steel and be in
conformance with ASTM A569.