Specification

Thomas and Betts Corporation
Product Guide Specification
METAL FRAMING SYSTEM - SUPERSTRUT®
26 05 29.12-1
REVISION 0
Specifier Notes: This product guide specification is written according to the Construction Specifications Institute
(CSI) 3-Part Format, including MasterFormat, SectionFormat, and PageFormat, as described in The Project
Resource Manual—CSI Manual of Practice, Fifth Edition.
This section must be carefully reviewed and edited by the Architect or Engineer to meet the requirements of the
project and local building code. Coordinate this section with other specification sections and the Drawings. Delete
all “Specifier Notes” after editing this section.
Section numbers are from MasterFormat 2010 Update.
SECTION 26 05 29.12
METAL FRAMING SYSTEM - SUPERSTRUT®
Specifier Notes: Delete any information below in Parts 1, 2 or 3 which is not required or relevant for the project.
PART 1 – GENERAL
1.01 SUMMARY
A. This section includes Superstrut® metal framing system consisting of channel and accessories for
support systems and surface raceway systems.
B. Related Sections:
1. 26 05 29.11 Modular Metal Framing System - Kindorf®
1.02
REFERENCES
A. National Fire Protection Association (NFPA):
1. NFPA 70 National Electrical Code (NEC)
B. Federal Specifications:
1. W-C-582 Conduit, Raceway, Metal and Fittings: Surface
2. WW-H-171 Hanger and Support, Pipe
C. Metal Framing Manufacturers’ Association
1. MFMA-4 Metal Framing Standard Publication
2. MFMA-101 Guidelines for the Use of Metal Framing
D. American Society for Testing and Materials (ASTM):
1. ASTM B633 Standard Specification for Electrodeposited Coatings of Zinc on Iron
and Steel
1.03 SUBMITTALS
A. Comply with Section 01 33 00 – Submittal Procedures.
B. Product Data:
1. Submit manufacturer’s descriptive literature and product specifications for each product.
2. Manufacturer’s product drawings.
C. Manufacturer’s installation instructions