Cut Sheet

Beam Clamps
D-28
Metal Framing, Pipe Hangers and Accessories
For use with E-231 and E-232 clamps when
hanger rod is not in straight through position.
Beam Clamps for Hanging Rod
A
• Clamps to I-beams, channels, angles and column
• Two sizes are available, one for
3
⁄8 inch and the other for
1
⁄2 inch
hanger rod. Each takes flanges up to .8 inch thickness
E-233 — Anchor Clip
E-231 — Structural Steel Clamp
DIMENSIONS (IN.) WT.
CAT. NO. A B C LBS./C
3
⁄ 8 " or
1
⁄ 2 " Rod
*E-231-3⁄8 2
1
⁄2 1
7
⁄8 31
**E-231-1⁄2 31
9
⁄32
15
⁄16 53
Assembly requires two H-116-C (
3
⁄ 8 ") or two H-116-D (
1
⁄ 2 ") square nuts to attach hanger rod.
1
⁄ 2 " steel.
* Load rating of 500 lbs. with a safety factor of three.
** Load rating of 800 lbs. with a safety factor of three.
Galv-Krom
®
finish.
Standard Finish – GoldGalv
®
, unless otherwise stated.
DIAMETER DIMENSIONS (IN.) WT.
CAT. NO. FOR ROD (IN.) A B C LBS./C
3
⁄ 8 " or
1
⁄ 2 " Rod
*E-232-3⁄8
3
⁄8
9
⁄16
7
⁄16 148
**E-232-1⁄2
1
⁄2
7
⁄8 2
9
⁄64 1
5
⁄8 76
* Load rating of 400 lbs. with a safety factor of three.
** Load rating of 550 lbs. with a safety factor of three.
Galv-Krom
®
finish.
• E-231 clamp with swing connector
• Affords a convenient method of attaching to angled beams
A
B
A
B
C
C
ROD MAX. BEAM FOR USE WT.
CAT. NO. SIZE (IN.) WIDTH "A" (IN.) WITH LBS./C
E-233-3⁄8-6
3
⁄8 6 E-231-3⁄8 or 20
E-233-3⁄8-10
3
⁄8 10 E-232-3⁄8 33
E-233-1⁄2-6
1
⁄2 6 E-231-1⁄2 or 26
E-233-1⁄2-10
1
⁄2 10 E-232-1⁄2 37
Anchor Clips should be used when clamps are subject to excessive vibration. To obtain
the correct size clips, add 1 inch to the flange width. If length required is not standard,
order next largest standard length.
Galv-Krom
®
finish.
E-232 — Clamp with Swing Connector